Forum of the Fraunhofer Additive Manufacturing Alliance

WEDNESDAY, 26 JUNE 2019

Location: CongressCenter, 2nd floor, Room Chr. Reichart


Advice: You can export your favourite lectures directly into your personal calender. Choose the lecture by ticking the box on the right side and then click the download button on the top of the schedule. Please export only one date at a time. 

 
 
 
 
08:30 - 09:30
Check-In
09:30 - 09:35
Welcome Carl-Zeiss Saal
09:35 - 10:30

At Siemens Power and Gas we are utilizing the benefits of Additive Manufacturing
to increase our customers satisfaction, enhance our products and optimize our
processes along the entire value chain from R&D to services. Thereby we are using
AM for our entire portfolio, from the compressor through the combustion to the
turbine applications of our entire fleet. Based on these high-end applications and
the connected requirements, we are driving the transfer of established industrial
standards and certificates also to the AM technologies. Hence, we expect open and
transparent AM systems, allowing us to access and influence all available data at
all times online in realtime; just as in other established industries e.g. Pharma, F&B
and semiconductor. These open systems shall be connected into production lines,
with vertically and horizontally totally integrated automation solutions and also
seamlessly integrated into one end-to-end PLM ecosystem. A holistically digitalized
ecosystem, with one integrated CAx Plattform beyond the classical CAD-CAECAM
mindset and with one data format. In AM all three disciplines consistently
affect one another and hence must be considered and represented simultaneously
to enable disruptive, generative, and more efficient topologies. Innovative Topologies
increasing the overall efficiency of our turbines and therefore also enabling us
to contribute to society, by fostering the global reduction of CO2 emission.

Keynote 2
Ulli Klenk | Siemens AG
10:30 - 10:45
Break
Session 1
10:45 - 11:15

Additive Manufacturing processes in digital production – from the idea to the quality product

Lecture 1/1
Dr. André Bergmann | Fraunhofer IPK
11:15 - 11:45

Influence of the Laser Spot Size on the Selective Laser Sintering of Polymers

Lecture 1/2
Dr. Jan Blömer | Fraunhofer UMSICHT
11:45 - 13:30
Lunch break and visit to the trade show
Session 2
13:30 - 14:00

Tailored energy source employment for hybrid processing of high performance materials in additive manufacturing

Lecture 2/1
Mirko Riede | Fraunhofer IWS
14:00 - 14:30

Hybrid-AM: Cost-Efficiency by combination of AM with conventional manufacturing processes

Lecture 2/2
Frank Beckmann | Fraunhofer IAPT
14:30 - 15:00

Aspects of the multi-material process chain in laser beam melting

Lecture 2/3
Max Horn | Fraunhofer IGCV
15:00 - 15:30
Break
Session 3
15:30 - 16:00

Combination of LBM-produced stainless steel components and aluminum castings

Lecture 3/1
Michael Norda | Fraunhofer IFAM
16:00 - 16:30

Surface Technology at additive manufactured components

Lecture 3/2
Dr.-Ing. Tim Abraham | Fraunhofer IST
16:30
End
TOP