Forum AM Science II

THURSDAY, 27 JUNE 2019

Location: CongressCenter, 3rd floor, Room Panoramasaal


Advice: You can export your favourite lectures directly into your personal calender. Choose the lecture by ticking the box on the right side and then click the download button on the top of the schedule. Please export only one date at a time. 

 
 
 
 
08:30 - 09:30
Check-In
09:30 - 09:35
Welcome Carl-Zeiss Saal
09:35 - 10:30

Qualification of components via Laser Beam Melting (LBM) in aerospace is subject
to a series of procedures, quality gates and tests. Specifications, norms and standards
are indispensable and form the basis for the qualification. An overview of the
most important standards and specifications will be given in the talk.
For more than 15 years, the Ariane Group, in collaboration with corporate partners,
has been developing and testing external companies and institutes for additive
manufactured components for applications e.g. in the field of turbopumps, combustion
chambers and structural components such as e.g. actuator bracket.
As part of the Ariane programme, many components manufactured using Laser Beam
Melting (LBM) will be developed in the launcher sector and will be flight-qualified
with the planned maiden flight of the Ariane 6 in 2020 and industrialized in the years
to come.
In addition to laser melting, other processes such as Wire & Arc Additive Manufacturing
(WAAM), Laser Metal Deposition (LMD) and so-called Cold Gas Spraying
(CGS) for large structures in development and qualification. Copper, steel and
nickel-based
materials (e.g. Inconel 718, Inconel 625, Hastelloy X) are the once
materials chosen for the various applications.
The presentation gives an overview of the challenges and hurdles in the introduction
and qualification of materials and processes and the use of additive-fabricated
components for space propulsion.

Keynote 3
Dr. Steffen Beyer | Ariane Group GmbH
10:30 - 10:45
Break
Session 4
10:45 - 11:15

Analysis of temperature control in robot-based material extrusion with polypropylene

Lecture 4/1
Sebastian Hertle | LKT Uni Erlangen, Lehrstuhl für Kunststofftechnik
11:15 - 11:45

Improving the mechanical properties in FLM-processing by locally laser-preheating and continuous fiber reinforcement

Lecture 4/2
Cornelius Kühn | Universität Duisburg-Essen in Kooperation mit Siemens AG
11:45 - 13:30
Lunch break and visit to the trade show
Session 5
13:30 - 14:00

The interdependency of powder properties and exposure parameters in selective laser beam melting of polymers on part properties

Lecture 5/1
Andreas Jaksch | Universität Erlangen, Lehrstuhl für Kunststofftechnik
14:00 - 14:30

Powder particles design in laser sintering: Material optimization of technical plastic powder

Lecture 5/2
Markus Piechotta | Universität Duisburg-Essen, Lehrstuhl Fertigungstechnik
14:30 - 15:00

Geometry-specific process control for increasing the efficiency of Laser Powder Bed Fusion (LPBF)

Lecture 5/3
Tobias Pichler | Fraunhofer ILT
15:00 - 15:30

Microscopic Support Structure Design For Wet-chemical Support Removal of LPBF-manufactured Parts Made of AlSi10Mg

Lecture 5/4
Tobias Schmithüsen | Fraunhofer ILT
15:30
End
TOP